| The Model 55SH Series II microphone provides the Shure classic UNlDYNEŽ II design coupled with modern acoustic components to meet today's performance standards. This microphone is excellent for vocal pickup with its characteristic Shure presence peak.
The 55SH Series II microphone has a cardioid (unidirectional) polar pickup pattern that minimizes sound pickup from the rear of the microphone. This allows the Model 55SH Series II to be used in close proximity to loudspeakers without creating feedback problems, and it can perform under adverse acoustic conditions where omnidirectional microphones cannot.
55SH Series II Includes Swivel Stand Mount Base, On-Off Switch; Cable not included.
Features
- Classic appearance, modern performance
- Frequency response tailored for speech, vocals and instrumental music
- Cardioid directional pattern for optimum performance in adverse acoustic environments
- Shock-mounted cartridge minimizes stand-transmitted noise, ensures quiet operation
- Rugged die cast case and mechanical design for reliability under rigorous conditions
- Self-tensioning swivel mount, permits tilting through 45 degrees forward and 80 degrees backward
The 55SH Series II has a low-impedance balanced output designed for connection to microphone inputs rated at 75 to 300 ohms. The microphone features a cartridge shock mount to reduce stand noise, an On/Off switch, and an attached, self-tensioning, 5/8"-27 thread swivel mount. This microphone is ideal for public address or theater-stage sound systems, as well as for broadcasting, recording, and other sound applications where a stand-mounted microphone with a classic look is desirable.
Specifications
Type
Dynamic
Frequency Response
50 to 15,000 Hz
Polar Pattern
Cardioid (unidirectional), uniform with frequency, symmetrical about axis
Impedance
Microphone rating impedance is 150 ohms (270 ohms actual) for connection to microphone
inputs rated at 75 to 300 ohms
Sensitivity (at 1,000 Hz)
Open Circuit Voltage: -58.0 dBV/Pa (1.3 mV)
1 Pascal=94 dB SPL
Polarity
Positive pressure on the diaphragm produces positive voltage on pin 2 relative
to pin 3 of the output connector
Switch
Built-in On/Off switch, integral part of swivel mount, connector Three pin professional
type, designed to mate with Cannon XL series, Switchcraft A3 (Q.G.) series, or
equivalent
Case
Chrome-plated die casting
[Model: 55SH Series II] |
|
